Pertama sekali, selepas mengambil p

Pertama sekali, selepas mengambil palet barangan dari rak, pengendali Reach Truck perlu memastikan bahawa palet barangan adalah tersusun dan stabil. Pengendali tersebut juga perlu mengetahui kapasiti Reach Truck dan memastikan bahawa palet barangan tidak melebihi kapasiti tersebut. Semasa menuju ke kontainer trailer yang terletak di loading platform, pengendali tersebut perlu brak dengan perlahan dan berhenti di hadapan ramp sambungan loading platform dengan kontainer trailer yang mencodong sedikit. Pengendali harus membawa Reach Truck untuk menaiki ramp, memasuki kontainer dan menurun dari ramp dengan perlahan dan berhati-hati. Pengendali mesti mengelakkan daripada memasuki kontainer dengan cepat dan/atau menekan brek secara terburu-buru kerana keberatan Reach Truck dan palet barangan akan menggerakkan kontainer walaupun terdapat brek roda dan landing gear. Kedua, pengendali tersebut perlu memastikan dan melaraskan Reach Truck tersebut supaya menjadi (lebih atau kurang) lurus dengan kontainer dan bukan dalam keadaan senget supaya Reach Truck tidak terlanggar mana-mana tepi semasa memasuki kontainer trailer. Selepas itu, pengendali tersebut juga perlu memandu Reach Truck memasuki kontainer trailer secara lurus. Pengendali Reach Truck juga perlu memastikan fork dan heel Reach Truck tersebut adalah berada dalam ketinggian yang sesuai untuk mengelakkannya daripada terlanggar permukaan bawah kontainer. Kuasa impak (force) yang diakibatkan oleh pelanggaran oleh Reach Truck bersama dengan palet barangan yang berat turut boleh menggerakkan kontainer walaupun terdapat brek roda dan landing gear.

Results (English) 1:

First of all, after taking items off the shelf pallet, Reach Truck operators must ensure that the pallet of goods is organized and stable. The operators also need to know the capacity of Reach Truck and ensure that pallets of goods does not exceed the capacity.

While heading to the container trailer located on the loading platform, the operator needs to brake slowly and stopped in front of the loading dock ramp platform trailers with containers that mencodong bit. Reach Truck Operator should take to ramp up, and dropped into the container from the ramp slowly and carefully. The operator must prevent from entering the container quickly and / or the brakes in a hurry because of objections Reach Truck and pallets of goods will move the containers despite wheel brakes and landing gear.

Second, the operator must ensure and adjust Reach Truck is to be (more or less) straight to the container and not in a state tilted so Reach Truck not violated any edge when entering the container trailer. After that, the operator should also drive Reach Truck trailer container entering the straight.

Reach Truck Operators must also ensure Reach Truck fork and the heel is to be in the right height to prevent it from hitting the bottom surface of the container. Power impact (force) caused by the violation by Reach Truck with heavy pallets of goods can also move the containers despite wheel brakes and landing gear.

Results (English) 2:

First of all, after taking a pallets of stuff from the shelves, Truck Reach operators should make sure that the palette of the items are structured and stable. The operator also needs to know the Reach capacity Truck and ensure that the palette of goods does not exceed the capacity.

While heading to the container trailer located on the loading of the platform, the operator needs to be slow down and stops in front of ramp the loading of the platform with the container of a little trailer. Operators should carry Reach Truck to ride ramp, enter container and decrease from ramp slowly and carefully. The operator must avoid entering container quickly and/or presses the brakes in a hurry due to the mind of Reach Truck and pallets of stuff will move container even if there is a wheel brake and landing gear.

Secondly, the operator must ensure and adjust the Reach of the Truck to be (more or less) straight with container and not in the circumstances so that the Reach of Truck does not break any side while entering the trailer container. After that, the operator also has to drive the Reach of Truck into a straight container trailer.

Truck Reach operators also need to ensure that the fork and heel tracks Reach Truck are in the appropriate height to prevent it from the bottom of the container surface. The impact power (force) caused by the Truck by Reach with a heavy palette of goods can also move container even if there is a wheel brake and landing gear.